Studio & Lighting

ProMaster Reflector Holder Arm The 4213 Reflector Holder Arm is designed to work with pop-up reflectors and backgrounds that use an internal, metal...

5-pin DMX to 3-pin push-pull adapter for the Sidus One and STORM 80c The Aputure Sidus One DMX 2-Way Splitter Cable is a 5-pin DMX adapter that giv...

Amaran USB-C to 5-Pin DMX In & Out Adapter The amaran USB-C to 5-Pin DMX In & Out Adapter is a DMX expansion module that adds wired 8-bit D...

Manfrotto 066 Double Female Stud for Super Clamp Plugs into Super Clamp 035 to provide either a 3/8'' or 1/4" female thread fixing. Features: Doub...

Enjoy Constant Power for the FJ200 Strobe in the Studio The FJ200 AC Power Adapter provides a constant supply of power to the FJ200 strobe for in-...

Aputure Storm 700x 8-Pin Cable 49' (15m) The STORM 700x 8-Pin Cable 49' (15m) is a longer 15-meter head cable designed for the STORM 700x, which in...

Savage Port-A-Stand Crossbar Metal crossbar replacement part for the current Savage Port-A-Stand model. The crossbar extends from 52" to 10.6'. Fea...

Longer Head Cable for PavoSlim LED Panel Lights This is a 24.6-foot (7.5m) head cable for a PavoSlim LED panel light. It's nearly 200% longer than...

Longer Head Cable for PavoSlim LED Panel Lights This is an 8.5-foot (2.6m) head cable for a PavoSlim LED panel light. It's the same cable that ...

Westcott D-Tap to 2-Pin Locking Cable Take the L120-B anywhere with this secure Locking Cable with D-Tap compatibility. This cable allows you to...

S-RMS1AM-ACC Remote Camera Cable The S-RMS1AM-ACC Remote Camera Cable connects a PocketWizard radio to Sony’s RM-S1AM or Minolta’s RC-1000 terminal...

The HSFM3 Cable allows you to trigger a flash that does not have a standard sync port. Simply slide your flash into the top shoe then connect the o...

Kupo 3 Section Baby Stand Extension 3-section black aluminum pole allows extending from 3’ (89cm) to 7.7‘ (230cm) and can be locked with the die-ca...

This Infinibar 24V Power Adapter Kit from Aputure provides up to 168W of power to the PB3, PB6, or PB12 Infinibar RGB LED panel lights. Features: ...

The Aputure 4-Way Power Splitter Cable is an accessory for the PB3, PB6, and PB12 Infinibar RGB LED panel lights. Features: For Infinibar Series L...

The FJ80-SE Battery Charger & Cord are designed for the Westcott FJ80-SE Speedlight Battery (#4662). With a 8.4V battery charge voltage, it rec...

The Aputure Infinibar 24V AC Power Adapter Kit offers a maximum power output of 250W for the PB3, PB6, or PB12 INFINIBAR RGB LED panel lights. Feat...

Kupo 4 Section Baby Stand Extension The Kupo Baby Stand Extension features a robust 4-section black aluminum pole designed to elevate your studio s...

The Westcott Battery Charger and Cord for FJ80 II Speedlights recharges the FJ80 II's lithium-ion polymer battery in about two hours. An AC adapter...

Kupo 2.6' Long Safety Cable Protect your equipment with this reliable steel safety cable. Measuring 29.5" (75cm) in length with a compact 0.13" (3....

Kupo 3-Section Extension Pole 10.7 to 17" The extension pole includes one riser and two sections and comes with a 3/8’’-16 thread male on one end a...

The ProMaster Battery & Charger Kit is a terrific companion for ensuring you always have plenty of power for your camera. It includes a Dually ...

Kupo Aluminum Baby Handheld Boom Arm The heavy-duty aluminum construction boom arm comes with three risers and four sections allowing extension of ...

Kupo 17.5" Super Viser Clamp The 17.5" Super Viser Clamp is a robust, single-handed mounting solution for securing lighting fixtures and grip acce...

Kupo Baby Boom A boom is an essential tool for positioning a light fixture either directly above the photographer videographer or cinematographer ...

Kupo 9" Super Viser Clamp (Center Jaw with Baby Receiver) The Super Viser is an extremely strong and versatile clamp. It can mount securely onto r...

Kupo 9" Super Viser Clamp (End Jaw) Super Viser Clamp is built with an aluminum die casting body making it sturdy and lightweight. The moveable jaw...

Manfrotto 118 Universal Short 16mm Male Spigot with Double Male Thread (1/4" & 3/8") for 026 26mm Long Adapter The Manfrotto 118 16mm spigot wi...

Kupo 3.5" Long 5/8" Baby Stud with 1/4"-20 Male Thread The Kupo 3.5" Long 5/8" Baby Stud w/ 1/4"-20M holds a small light monitor or can be used to ...

Kupo 3.5" Extra Long 5/8" Baby Stud with 3/8"-16 Male Thread This adapter is a 3.5” long 5/8” baby stud with 3/8”-16 male thread 1" (25.4mm) in len...

Kupo 4.5" Center Grip Head with 28mm Pin The 4.5” Center Grip Head consists of a pair of rotating aluminum discs attached to a junior 28mm (1-1/8"”...

Kupo 4" Super Viser Clamp (End Jaw with Hex Receiver) The Super Viser is an extremely strong and versatile clamp. It can mount securely onto round ...

Kupo Junior to Baby Adapter (Junior 1-1/8" Stud to Baby 5/8" Stud) The Stand Adapter enables you to mount a light fixture or accessory with a baby ...

Kupo 5/8" (16mm) Stud with 1/4"-20 Female Make the most of your camera equipment by adapting 1/4"-20 male connections to 5/8" Baby Stud compatibili...

Manfrotto 191 5/8" Male Stud with 3/8" Male Thread Adapter The Manfrotto 191 Adapter provides dual-standard connectivity. Its 5/8" flanged Baby st...

Manfrotto 119 Short Female Spigot Adapter (16mm) with 1/4"-20 & 3/8" Threads Universal short 16mm spigot with double female thread 1/4" and 3/...

Manfrotto 013 Double End Stud (1/4"-20 & 3/8") Adapter Spigot Essential, top-quality, and extremely versatile, this Adapter Spigot is a necessa...